Payden
Stewart, Andrea Cypert, and Ty Bufkin

First Generation (1945-1956)
The
abacus,
which emerged about 5,000 years ago in
American
efforts produced a broader achievement. Howard H. Aiken (1900-1973), a Harvard
engineer working with IBM, succeeded in producing an all-electronic calculator
by 1944. The purpose of the computer was to create ballistic charts for the U.S.
Navy. It was about half as long as a football field and contained about
500 miles of wiring. The Harvard-IBM Automatic Sequence Controlled Calculator,
or Mark I for short, was a electronic relay computer. It used electromagnetic
signals to move mechanical parts. The machine was slow (taking 3-5 seconds per
calculation) and inflexible (in that sequences of calculations could not
change); but it could perform basic arithmetic as well as more complex
equations.
Another
computer development spurred by the war was the Electronic Numerical Integrator
and Computer (ENIAC),
produced by a partnership between the
In
the mid-1940's John
von Neumann (1903-1957) joined the University of Pennsylvania team, initiating
concepts in computer design that remained central to computer engineering for
the next 40 years. Von Neumann designed the Electronic Discrete Variable
Automatic Computer (EDVAC) in 1945 with a memory to hold both a stored program as well as
data. This "stored memory" technique as well as the "conditional
control transfer," that allowed the computer to be stopped at any point and
then resumed, allowed for greater versatility in computer programming. The key
element to the von Neumann architecture was the central processing unit, which
allowed all computer functions to be coordinated through a single source. In
1951, the UNIVAC
I (Universal
Automatic Computer), built by Remington Rand, became one of the first
commercially available computers to take advantage of these advances. Both the U.S.
Census Bureau and
General Electric owned
UNIVACs. One of UNIVAC's impressive early achievements was predicting the winner
of the 1952 presidential election, Dwight
D. Eisenhower.
First
generation computers were characterized by the fact that operating instructions
were made-to-order for the specific task for which the computer was to be used.
Each computer had a different binary-coded program called a machine language
that told it how to operate. This made the computer difficult to program and
limited its versatility and speed. Other distinctive features of first
generation computers were the use of vacuum
tubes (responsible for their breathtaking size)
and magnetic drums for data storage.
Second Generation Computers (1956-1963)
By
1948, the invention of the transistor
greatly changed the computer's
development. The transistor replaced the large, cumbersome vacuum tube in
televisions, radios and computers. As a result, the size of electronic machinery
has been shrinking ever since. The transistor was at work in the computer by
1956. Coupled with early advances in magnetic-core memory, transistors led to
second generation computers that were smaller, faster, more reliable and more
energy-efficient than their predecessors. The first large-scale machines to take
advantage of this transistor technology were early supercomputers, Stretch by
IBM and LARC by Sperry-Rand. These computers, both developed for atomic energy
laboratories, could handle an enormous amount of data, a capability much in
demand by atomic scientists. The machines were costly, however, and tended to be
too powerful for the business sector's computing needs, thereby limiting their
attractiveness. Only two LARCs were ever installed: one in the Lawrence
Radiation Labs
in
Throughout
the early 1960's, there were a number of commercially successful second
generation computers used in business, universities, and government from
companies such as Burroughs, Control
Data, Honeywell,
IBM, Sperry-Rand, and others. These second generation computers were also of
solid state design, and contained transistors in place of vacuum tubes. They
also contained all the components we associate with the modern day computer:
printers, tape storage, disk storage, memory, operating systems, and stored
programs. One important example was the IBM 1401, which was universally accepted
throughout industry, and is considered by many to be the Model T of the computer
industry. By 1965, most large business routinely processed financial information
using second generation computers.
It
was the stored program and programming language that gave computers the
flexibility to finally be cost effective and productive for business use. The
stored program concept meant that instructions to run a computer for a specific
function (known as a program) were held inside the computer's memory, and could
quickly be replaced by a different set of instructions for a different function.
A computer could print customer invoices and minutes later design products or
calculate paychecks. More sophisticated high-level languages such as COBOL
(Common Business-Oriented Language) and FORTRAN
(Formula Translator) came into common use during this time, and
have expanded to the current day. These languages replaced cryptic binary
machine code with words, sentences, and mathematical formulas, making it much
easier to program a computer. New types of careers (programmer, analyst, and
computer systems expert) and the entire software
industry
began with second generation computers.
Third Generation Computers
(1964-1971)
Transistors
were better than the vacuum tube,
but they still generated a great deal of heat, which damaged the computer's
sensitive internal parts. The quartz rock eliminated this problem. Jack
Kilby, an engineer with Texas
Instruments, developed the integrated circuit in. Scientists later managed to
fit even more components on a single chip, called a semiconductor. As a result,
computers became ever smaller as more components were squeezed onto the chip.
Another third-generation development included the use of an operating
system that allowed machines to run many
different programs at once with a central program that monitored and coordinated
the computer's memory.
Fourth Generation
(1971-Present)
After
the integrated circuits, the only place to go was down - in size, that is. Large
scale integration could fit hundreds of components onto one chip; very large
scale integration squeezed hundreds of thousands of components onto a chip.
Ultra-large scale integration increased that number into the millions. The
ability to fit so much onto an area about half the size of a U.S. dime helped
diminish the size and price of computers. It also increased their power,
efficiency and reliability. The Intel
4004 chip,
took the integrated circuit one step further by locating all the components of a
computer on a small chip.
In
1981, IBM introduced its personal computer for use in the home, office and
schools. The number of personal computers in use more than doubled from 2
million in 1981 to 5.5 million in 1982. Ten years later, 65 million PCs were
being used. Computers continued their trend toward a smaller size, working their
way down from desktop to laptop computers to palmtop. In direct competition with
IBM's PC was Apple's Macintosh line. Notable for its user-friendly design, the
Macintosh offered an operating system that allowed users to move screen icons
instead of typing instructions. Users controlled the screen cursor using a
mouse, a device that mimicked the movement of one's hand on the computer screen.
As
computers became more widespread in the workplace, new ways to harness their
potential developed. As smaller computers became more powerful, they could be
linked together, or networked, to share memory space, software, information and
communicate with each other. As opposed to a mainframe computer, which was one
powerful computer that shared time with many terminals for many applications,
networked computers allowed individual computers to form electronic co-ops?
Using either direct wiring, called a Local
Area Network (LAN), or telephone lines, these networks could reach enormous
proportions. A global web of computer circuitry, the Internet, for example, links computers worldwide into a single network of
information.
In
the next 10 years, computers will be cheaper, better and have more things you
can do.
In
the next 100 years, I think that computers will be better with more memory in
the computer and they will be smaller also a lot faster and more advanced.
Websites:
www.excite.com , www.esc9.net/munday
Flags
courtesy of Munday ISD







